济南花纹铝板在生活中作用是很大的，由于在生产过程中经常会出现铸锭疏松或是气孔等缺陷，给生产过程带来很多麻烦，要想济南花纹铝板更漂亮，需要对其进行水洗处理，下面济南广大铝业的有关专家就给大家介绍一下花纹铝板是如何清洗的？
1、经碱蚀后花纹铝板表面会残留大连的碱蚀槽液膜，济南铝板的有关技术人员说这时我们要从有利于清洗产品的角度出发,第一个水槽的水要保持温度和碱性，就不要去更换水，为了使清洗效果更好,我们可以适当的其搅拌。
After alkaline etching pattern aluminum surface will be left Dalian alkaline etching grooves film, the technical staff Jinan aluminum say when we want conducive cleaning product point of view, the first tank of water to keep the temperature and alkalinity, is not going to replace the water, in order to clean better, we can appropriate their agitation.
2、济南铝板的有关技术人员建议使用循环流动水清洗，这样做的目的是为了保护氧化槽的正常时用，因为在中和槽内有硝酸,它如果被带入到氧化槽中的话,就有可能形成不了氧化膜,或者在氧化槽中的杂质的增加,这样会加快氧化槽的老化。
Jinan technical staff recommended to use an aluminum plate cleaning circulation water, which purpose is to protect the normal time by the oxidation tank, neutralization tank as nitric acid, it was brought to the oxidation tank, if so, it is possible can not form an oxide film, or increasing the oxidation tank impurities, this will accelerate the aging of the oxidation tank.
3、化学抛光后的水洗，化学抛光后会从残留一些药液,济南铝板的有关技术人员建议第二水槽使用循环流动水洗,第一个水槽保持温度就行了。
After washing chemical polishing, chemical polishing will post some residual liquid from Jinan aluminum of the technical staff recommends the use of a second circulating water tank, the first tank to keep the temperature on the line.

4、济南花纹铝板在除油后后会残留一些药物和油垢，要将其清洗干净，以免在后续清洗中因携带油垢而产生不良品。
Jinan pattern aluminum in the oil after some residual drugs and grease, you want to clean, in order to avoid subsequent cleaning grease for carrying produce defective products.

济南铝板：http://www.jngdly.com/