济南铝卷具有表面防雨、抗撞击、外观颜色多样，装饰性强、使用寿命长等特点，是一种新型保温装饰一体化的高级外装饰材料。那么如何焊接保温铝卷呢？
　　
1、济南铝卷http://www.jngdly.com/焊接时，焊条不能用焊枪先加热后蘸取焊粉，因为此焊条熔点太低；焊条必须均匀涂抹焊剂，才能确保焊点的质量；焊接保温铝卷的时间不能过长，因熔点太低时间过长容易导致铝管管壁融化或变薄，打压极易泄漏；焊接保温铝卷的焊枪火焰不能过长，且必须用微火加热，否则分散剂铝管极易熔化。
Jinan aluminum coil after welding, the electrode can be heated with a torch dipped in solder powder, melting point is too low because the electrode; welding flux must be applied evenly to ensure the quality of solder joints; time welding aluminum coil insulation can not be too long, because the melting point too low for too long prone to melting or aluminum wall thinning, easy to suppress leakage; torch flame welding aluminum coil insulation can not be too long and must be heated with a slow fire, otherwise dispersants easily melted aluminum.
　　
2、济南铝卷http://www.jngdly.com/内胆必须放置湿毛巾，保护到位，因焊接空间很狭小，因此务必注意冰箱的保护。保温铝卷焊接一次性成功效果更佳，因铝管熔旋切刀具点太低，第二次再加热时，铝管极易变形。焊接完毕，要等尼龙丝专用浆料二、三分钟管子冷却后才水泥储存库能接触，否则焊点易漏。
Jinan aluminum coil liner must be placed wet towels to protect the place, due to welding space is very small, so be sure to pay attention to the protection of the refrigerator. Welding aluminum coil insulation better time success, because aluminum is too low melting point peeling knives, when the second reheating, aluminum easily deformed. Welding is completed, nylon special paste to wait two, three minutes after the cement pipe cooling repository can contact, otherwise leaky joints.