为了满足用户的需要，装饰用铝板一般经过表面处理才能投放市场，所以装饰铝板表面处理是比较重要的，那么铝板表面应该如何处理呢？

1、阳极氧化，20世纪50年代已引入铝合金门窗，至今仍是铝门窗以及装饰铝板常用的表面处理措施。
Anodic oxidation, has been introduced in the 1950s aluminum windows and doors, aluminum doors and windows, and is still commonly used in decorative aluminum surface treatment measures.
2、阳极氧化后电泳丙烯酸树脂，是一种普通的油漆，直接喷涂到在清洗好后的铝板表面上再进行过炉烘烤，其耐候性5-6年。该技术当前已由透明光亮膜发展到无光透明膜和彩色膜，品种更趋多样化，工业控制和产品质量都比较稳定。
After electrophoresis, the anodization acrylic resin is a common paint sprayed directly on the surface of aluminum plate After further washing the furnace baking, weatherability 5-6 years. The current technology has been developed to dull the brilliant film transparent film and color film, more diverse varieties, industrial control and product quality are relatively stable.
3、化学转化处理后静电喷涂包括静电粉末喷涂和静电液相喷涂，静电液相喷涂氟碳树脂在20世纪60年代，美国已实现商品化。而静电粉末喷涂热固性聚酯涂层，60年代末在欧洲已实现商品化，当前仍是欧洲各国占优势的表面处理手段。时至今日，单一阳极氧化的铝门窗在国内外市场均明显缩小日本青睐于电泳涂层，白色电泳涂层发展很快，并在欧洲得到应用。静电粉末喷涂以其色彩多样、控制方便、环境保护、性能优良等原因，已成为欧美的首选表面处理方法。
After the chemical conversion treatment, including electrostatic spraying liquid electrostatic powder coating and electrostatic spraying, electrostatic spraying liquid fluorocarbon resin in the 1960s, the United States has achieved commercialization. The electrostatic powder coating thermosetting polyester coating, the late 1960s has been commercialized in Europe, currently still dominated by European countries Surface treatment means. Today, a single anodized aluminum doors and windows in the domestic market were significantly reduced in favor of Japan electrophoretic coating, white electrophoretic coating developed rapidly, and has been used in Europe. Electrostatic powder coating with its various colors, easy to control, environmental protection, excellent performance and other reasons, has become the preferred method for surface treatment in Europe and America.
4、喷漆：通常是氟碳喷涂，其工艺和聚脂油漆工艺相同，只是其油漆中含有氟碳的成分，氟碳的附着力很差。所以，必须配合环氧树脂混合使用而增加附着力，但也由于很多不良厂家偷减氟碳含量而冲击市场。铝板喷漆前的处理比较重要，要进行钝化处理才能保证油漆和铝板紧密结合，典型的用途是幕墙铝板均采用该方式进行表面处理。
Fluorocarbon coating is usually the same as its process and polyester paint process, but the composition of its fluorocarbon paint containing fluorocarbon poor adhesion. Therefore, we must be mixed with epoxy resin to increase adhesion, but also because many manufacturers to steal less adverse impact on the market and fluorocarbon content. Treatment before painting aluminum is more important, the need for passivation to ensure the paint and aluminum closely, typical use is the way walls are made of aluminum surface treatment.

济南铝板：http://www.jngdly.com/